Audio Technica System 20 PRO - Setting the Equalizer

Setting ATW-R1440
69
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “TX SETTING” and press the control dial.
3
Turn the control dial to select “VERSION”.
The firmware version appears.
Resetting
Set the transmitter settings to the factory defaults.
The receiver’s transmitter information will not be deleted.
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “TX SETTING” and press the control dial.
3
Turn the control dial to select “RESET” and press the control dial.
4
Select “Yes” and press the control dial.
5
Select “Yes” and press the control dial.
The settings are reset.
Setting the equalizer
You can use the dedicated software (Wireless Manager) to configure more detailed settings.
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “UTILITIES” and press the control dial.
3
Turn the control dial to select “EQ” and press the control dial.