Setting ATW-R1440
71
Deleting transmitter registration
You can delete the registration of the paired transmitter.
This is displayed when multipairing is set to “On”.
The transmitter’s receiver information will not be deleted.
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “UTILITIES” and press the control dial.
3
Turn the control dial to select “MULTI TX ID” and press the control dial.
4
Turn the control dial to select the ID of the registration to delete and press the control dial.
Each press of this button selects or clears the check box.
5
Turn the control dial to select “Delete” and press the control dial.
The registration of the channel with the selected check box is deleted.
Checking the communicating device
1
Press the CH MENU button to select the channel to set.
Each press of this button switches the channel to set.
2
Turn the control dial to select “IDENTIFY” and press the control dial.
For a set period of time, the indicator lamp of the transmitter with which communication has been
established lights alternately between green, red, and yellow.
To Next Page
Loading...
