AUI fb-600E - Page 72

- 66 -
◆ Requirement of Multi-ply paper (NCR paper)
It is recommended to use the multi-ply paper which is in the first class or above. Low class NCR
paper would affect the copy effect and printer life.
Specification of NCR multi-ply paper is shown below:
Pages 2-ply 3-ply 4-ply 5-ply 6-ply 7-ply
Page 1 40 ~ 64 g/m
2
40 ~ 50 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
Page 2 40 ~ 80 g/m
2
40 ~ 50 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
Page 3 ---- 40 ~ 80 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
Page 4 ---- ---- 40 ~ 80 g/m
2
40 g/m
2
40 g/m
2
40 g/m
2
Page 5 ---- ---- ---- 40 ~ 80 g/m
2
40 g/m
2
40 g/m
2
Page 6 ---- ---- ---- ---- 40 ~ 80 g/m
2
40 g/m
2
Page 7 ---- ---- ---- ---- ---- 40 g/m
2
◆The protuberance of transverse perforation
When the fanfold transverse perforation sticks up, it may cause print quality decrease, unstable
paper feed or paper jam etc. Especially when the multi-ply paper is with many pages, it will deeply
affect the stable of paper feed. Please ensure the protuberance height is less than 1 mm.
6.35
Loading direction
Unit: mm
6.35
Fixed tightly
Not fixed tightly
25.4
Transverse perforation
Above 2
Paper binding space is
over 50.8mm
(
2inches
)
3 ~ 4
About 1
Press down to
avoid warping
If bind the four
places together
50.8 Space
The size and position of paper
binding (Double-ply)
Expanding figure of
the binding part
Transverse perforation
Transverse perforation
Less than1 mm
Less than 1 mm