Austro Engine AE300-Wizard User Manual

AE300-Wizard
Document No.: E4.08.09 E4.08.09 : AE_xx_000
Revision: 13 9 : 00
Page: 1 of 89
Copyright © 2019, Austro Engine GmbH
Dept.: Electric/Electronic
Type: User Guide
AE300-Wizard
User Guide
Date: Wiener Neustadt, 2019-09-03
Author: Austro Engine GmbH
Rudolf-Diesel-Straße 11
2700 Wiener Neustadt
AUSTRIA / EUROPE
Revision: 13
These technical data and the information contained therein are the property of Austro
Engine GmbH and may not be reproduced either in full or in part or passed on to a third
party without written consent from Austro Engine GmbH.
This text must be included in any full or partial reproduction of this documentation.
Copyright © Austro Engine GmbH

Austro Engine AE300-Wizard Specifications

General

Brand	Austro Engine
Model	AE300-Wizard
Category	Measuring Instruments
Language	English

Summary

Requirements

Software

Lists software requirements for the AE300-Wizard.

Hardware

New Installation

Pre-Conditions

Automatic Installation

Manual Installation

Upgrade Installation

Download Upgrade Package

Install Upgrade Package

Overview and First Steps

CAN Connection

Explains how to connect the CAN adapter to the PC and aircraft.

Setting up the Aircraft

Start of Diagnostic Session

Saving of Data during a Diagnostic Session

Modes of Operation

Offline Mode

Describes the AE300-Wizard's offline functionality for data analysis.

Maintenance Mode

Standard operating mode for routine diagnostics and maintenance.

Qualified Maintenance Mode

Advanced mode for ECU SW updates and IQA coding.

Diagnostic Procedures

Analyzing Operational Data

How to interpret engine operational and statistical data.

Engine and ECU Operating Hours Counters

Operational Statistics

Viewing statistical engine usage data in table or graph format.

Routine Maintenance

Engine Log File

Saving the engine log file containing ID, operational data, and fault memory.

Event Recorder File

Downloading and saving event recorder data in hex dump format.

Data Logger File (Full Flight Time)

Partial Data Logger File (Fraction of Flight Time)

Trouble Shooting

Recommended procedures for fault finding.

Using the Fault Code Memory (FCM)

How to access and interpret fault code memory entries.

Offline Analysis Using the Engine Log

Offline Analysis Using the Event Recorder

Offline Analysis Using the Data Logger

Overview of the FCM Functionality

Displaying Fault Details

Clearing the Fault Code Memory

Displaying Fault Code Memory Entries

Displaying Engine Operational Statistics

The Event Recorder Window

Using Filters in the Event Recorder

Interpreting the Data Logger Display

Live View

Live View – Online Analysis and Recording

Viewing and recording ECU signals in real-time.

Live View – Online Analysis using Pre-Defined Measurements

Live View – Online Analysis Using User-Defined Measurements

Live View – Expert Mode

Live View – Offline Analysis

Live View – Defining and Saving a “LiveView-Config"

Live View – Importing Live View Recordings

Live View – Analyzing Live View Recordings

IQA Codes

Overview

Reading IQA Codes

Saving IQA Codes

Entering IQA Codes

Scanning Injector IQA Codes

EECU Replacement

EECU Software Update

Minimum Requirements

Lists the necessary items for performing EECU software updates.

Overview of the Software Update Process

Detailed Steps of the Software Update Process

Software Update Retry

Error Handling during Software Updates

Pre-Flash Conditions

Automatic Retries

Aborts

Unsuccessful Completion

Successful Completion

Calling for Support

Saving Failure Information