EasyManua.ls Logo

Austro Engine AE300-Wizard - Modes of Operation; Offline Mode; Maintenance Mode; Qualified Maintenance Mode

Austro Engine AE300-Wizard
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AE300-Wizard
Document No.: E4.08.09 E4.08.09 : AE_xx_000
Revision: 13 9 : 00
Page: 25 of 89
Copyright © 2019, Austro Engine GmbH
Dept.: Electric/Electronic
Type: User Guide
7 Modes of Operation
Depending on the license type the AE300-Wizard offers one of three possible operating
modes and their set of functions.
7.1 Offline Mode
This mode of operation, does not require a USB/CAN adapter dongle as described in chapter
6.4 Start of Diagnostic Session on page 22”. It is very useful to analyze and interpret down-
loaded data or to define measurement configurations at the office instead of in the cockpit.
7.1.1 Primary Display Left Page
7.1.1.1 Maintenance Tab
7.1.1.2 Engine Logs Tab
Buttons to:
- Load (import) and display an engine log file ( Load Engine Log )
- Load (import) an event recorder hex dump file ( Load EvRec )
- Load (import) a data logger hex dump file ( Load DataLog )

Table of Contents