Austro Engine AE300-Wizard - Requirements; Software

AE300-Wizard
Document No.: E4.08.09 E4.08.09 : AE_xx_000
Revision: 13 9 : 00
Page: 14 of 89
Copyright © 2019, Austro Engine GmbH
Dept.: Electric/Electronic
Type: User Guide
3 Requirements
3.1 Software
3.1.1 Operating System
Tool
bit
SP
Version
Manufacturer
Remark
MS Windows XP
32
2
5.1.2600.2180
Microsoft
MS Windows XP
32
3
5.1.2600
Microsoft
MS Windows 7
32/64
1
6.1.7601
Microsoft
Only with service pack 1
MS Windows 10
32/64
-
10.0.10240
Microsoft
Table 2 Supported Operating Systems
Note: Installation requires (local) administrator privileges. Ongoing Wizard operation does
not require administrator privileges.
3.1.2 .NET Environment
The minimum requirement for MS .Net Framework is version 4.0 with Service Pack 2 German
or English language version (dotNetFx40_Full_x86_x64.exe). This version is supplied on the
AE300-Wizard distribution CD.
3.1.3 Visual C++ Runtime Library
MS VC++ 2010 redistributable runtime library. This library is supplied on the AE300-Wizard
distribution CD as part of the AE300-Wizard software.
3.1.4 Driver for USB/CAN Adapter
PEAK System HW driver for the high speed CAN-to-USB adapter. This driver is supplied on
the AE300-Wizard distribution CD.
3.1.5 AE300-Wizard
It is recommended to use the latest version of the AE300-Wizard software. Use at least ver-
sion 1.3.4.xxx. To support Flash Container of SW Version VC33.6 use at least the AE300-
Wizard software version 1.3.3.xxx.