Document No.: E4.08.09 E4.08.09 : AE_xx_000
Revision: 13 9 : 00
Page: 50 of 89
Copyright © 2019, Austro Engine GmbH
Dept.: Electric/Electronic
8) Faults are to be selected on the left hand page and the corresponding details are
then displayed on the right hand page
8.2.7.2 Displaying Engine Operational Statistics
The content of the engine statistics counters will be presented in the same way as it would
be seen in interactive mode.
Perform steps 1) through 6) as described above and then:
7) Select «Statistics» tab
8) Click on Show/Hide Chart button
9) Select desired engine parameters by clicking on its line
10) Display any statistics view as would be done in interactive mode, directly connected
to an aircraft
To Next Page
Loading...
Need help?
General