Document No.: E4.08.09 E4.08.09 : AE_xx_000
Revision: 13 9 : 00
Page: 74 of 89
Copyright © 2019, Austro Engine GmbH
Dept.: Electric/Electronic
4) Load the IQA data file saved from the previous EECU
5) Click on Load IQA data from file button
6) Select “Wizard files” or “XML” format
7) Select filename
8) Click on Open button
9) The IQA data read in from the file will be filled into the input fields
10) Click on Write ALL Cylinders button
After the new IQA codes have been written, they will be automatically read back for verifica-
tion:
To Next Page
Loading...
Need help?
General