51
Stop Charging
To stop charging
Tap the Stop button on the screen.
NOTE
When the battery is full, the charge session stops automatically.
Normally, you have to authorize again to finish charging, using the same
authentication method as was used to start:
QR code: Tap the Stop button on the Charging Screen of the Autel
Charge app.
RFID card: Put the RFID card on the card reader again to finish charging.
Credit card: Finish charging directly.
When charging is finished, your order details will appear.
Figure 6-6 Order Details Screen
Disconnect the EV charging cable from the EV.
Put the EV charging cable in the connector holder on the MaxiCharger.
WARNING
Hazardous voltage. Do not unplug the connector suddenly during charging. This may
cause severe damage to the MaxiCharger and/or severe personal injury or death.
Finish Charging
Return the connector to the holster on the MaxiCharger.
To Next Page
Loading...
