61
Inspection and Maintenance
When the MaxiCharger operates normally, only routine maintenance is needed.
When the MaxiCharger operates abnormally, refer to Troubleshooting to resolve the
problem or contact your local dealer or Autel Technical Support promptly.
When parts need to be replaced, completely cut off the power supply upstream and inside
the equipment before operating.
Regularly conduct a visual inspection of the following points:
Cable and connector: Check for cracks or ruptures on the connector or cable.
Display: Check for damage and cracks. Check whether the touchscreen works.
Cabinet coating: Check for damage, cracks or ruptures.
Cabinet: Check for rust or damage.
The following special inspections are needed for safe use:
Check if the MaxiCharger was struck by lightning.
Check if the MaxiCharger was damaged due to an accident or fire.
Check the MaxiCharger installation site has been flooded.
WARNING
Stop any charging processes and do not connect the power to the MaxiCharger until all
the inspections are complete.
Remote Maintenance
The MaxiCharger has the function of connecting to cloud platform to monitor parameters
in real time. This provides remote upgrades, remote diagnosis, and remote service
functions, and can timely identify and locate problems in the operation process.
System self-check for abnormality daily.
If any operation abnormality is found, contact your local dealer or Autel technical
support promptly.
Autel service engineers can check logs, update configurations and programs, and
provide remote maintenance services, such as remote management, diagnosis,
configuration, and upgrades.
To Next Page
Loading...
