6 Parameter Settings and Functions
108 © Copyright Reserved Autonics Co., Ltd.
6.7.9.2 Password Recovery
Entering an incorrect password displays a coded form of the password on the SV display.
Submit this code to Autonics to recover your lost password.
Incorrect Password Entry (For example, the correct password
being1234)
1 Access SV parameter or parameter setting group.
2 When prompted with PASS, use the ◀ key to select the desired digit.
3 Use the ▼ and ▲ keys to select 4321(Incorrect Password) and then press MODE key.
Entering an incorrect password displays a coded password on the SV display. An
ERR message will also appear, flashing at one second intervals.
To Next Page
Loading...
