Autonics TK4L User Manual

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 95
6.6.5 Response Wait time Settings [PAR4→ RSW.T]
Set a standby time to mitigate communication errors when communicating with a slow
master device (PC, PLC, etc.). Once a standby time is set, the controller will respond after
the defined standby time.
Setting
Group
Parameter Setting Range
Factory
Default
Unit
PAR4
RSW.T
05
to
99
20
ms
Shorter standby times can cause communication errors in the master
device.
6.6.6 Enable/disable Communication Write[PAR4→ COMW]
This feature can change parameter settings stored in memory through communication
with PC, GP, PLC, etc., in order to permit or prohibit writing.
Setting Description
EN.A
Parameter set/change enable via communication.
DIS.A
Prohibit parameter setting or modification via communication.
Setting
Group
Parameter Setting Range
Factory
Default
Unit
PAR4
COMW
EN.A
/
DIS.A
EN.A
-
Reading parameter settings is always permitted.

Autonics TK4L Specifications

General

Brand	Autonics
Model	TK4L
Category	Temperature Controller
Language	English