Autonics TK4L - Page 82

6 Parameter Settings and Functions
82 © Copyright Reserved Autonics Co., Ltd.
Parameter Description
A1.ON
Alarm Output 1 On Delay: Stands by for the preset duration upon an alarm
event, checks the alarm trigger conditions, and turns on the alarm output if the
conditions are still present.
A1.OF
Alarm Output 1 Off Delay. Stands by for the preset duration following alarm
output off, checks the alarm trigger conditions, and turns off the alarm output if
the deactivation conditions are still present.
A2.ON
Alarm Output 2 On Delay. Stands by for the preset duration upon an alarm event,
checks the alarm trigger conditions, and turns on the alarm output if the
conditions are still present.
A2.OF
Alarm Output 2 Off Delay. Stands by for the preset duration following alarm
output off, checks the alarm trigger conditions, and turns off the alarm output if
the deactivation conditions are still present.
Setting
Group
Parameter Setting Range
Factory
Default
Unit
PAR4
A1.ON
0000
to
3600
0000
Sec
A1.OF
0000
Sec
A2.ON
0000
Sec
A2.OF
0000
Sec