Autronica Autroprime 2 - 3.5 Service Mode Password; 3.6 Date and Time

System Settings
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 18
3.5 Service Mode Password
This menu allows you to change the Service Mode Password.
A total of 4 characters must be used.
From the Service Menu, perform the following:
 Press Enter to select System Settings.
 Press the arrow down button to select Service Mode Password,
then press Enter twice.
 Type the new password, then press Enter.
 Type the new password once more, then press Enter.
 To confirm the new password, press Enter once more.
The message “Please wait…” will appear in the display and the
new password will take effect within a couple of seconds.
3.6 Date and Time
This menu allows you to set/change the date and time.
From the Service Menu, perform the following:
 Press Enter to select System Settings.
 Press the arrow down button to select Date and Time, then press
Enter twice.
 To change the time, overwrite the time (hours, minutes, seconds),
then press Enter.
 To change the date, overwrite the date (day, month, year), then
press Enter.
 To confirm the new settings, press Enter once more.

