Autronica Autroprime 2 - Show Carrier Points; Show Carrier Inputs

Unit Configuration
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 80
5.10.5 Show Carrier Points
This menu allows you to view Carrier Points.
From the Loop IO Carriers Menu (chapter 5.10.2), perform the
following:
 After pressing the Function button for the selected Loop IO
Carrier(s), use the arrow down button to scroll downwards to
Show Carrier Points, then press Enter.
In the display you will now see a list of all Carrier Points.
 Use the arrow up/down button to select a Carrier Point, then
press Enter.
In the display you will now see the relevant properties.
5.10.6 Show Carrier Inputs
This menu allows you to view Carrier Inputs.
From the Loop IO Carriers Menu (chapter 5.10.2), perform the
following:
 After pressing the Function button for the selected Loop IO
Carrier(s), use the arrow down button to scroll downwards to
Show Carrier Inputs, then press Enter.
In the display you will now see a list of all Carrier Inputs.
 Use the arrow up/down button to select a Carrier Input, then
press Enter.
In the display you will now see the relevant properties.

