Autronica Autroprime 2 User Manual

System Settings
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 27
3.19 System S hutdown
This menu selection allows you to bring the panel to a safe state
when the intention is to subsequently switch the power off by
disconnecting the mains power cable.
From the Service Menu, perform the following:
 Press Enter to select System Settings.
 Press the arrow down button to select System Shutdown.
 Press Enter, and the following message will appear in the display:

 The following message will appear in the display: ”System
Shutdown will do a controlled shutdown of the services.
When state System Fault is entered, it is safe to power off the
system.”
 To execute the command, use the left arrow button, then press
Enter.


Autronica Autroprime 2 Specifications

General

Brand	Autronica
Model	Autroprime 2
Category	Measuring Instruments
Language	English