Autronica Autroprime 2 User Manual

Unit Configuration
Configuration Handbook, Autroprime Interactive Fire Detection System, 116-P-APRIME2-CONFIG/EGB, Rev. A, 2013-04-03,
Autronica Fire and Security AS
Page 78
5.10.2 Accessing the Menu
From the Service Menu, perform the following:
 Use the arrow down button to scroll downwards to
Unit Configuration, then press Enter.
 Use the arrow down button to select Loop IO Carriers, then
press Enter once more.
 Use the arrow up/down buttons to select the Loop IO Carrier
that is to be configured.
 To view or change properties for the selected Loop IO Carrier,
refer to Configure Properties for a Loop IO Carrier
(chapter 5.10.3).
 To access available functions for a selected Loop IO Carrier,
press the Function button
, or use, if necessary, the
multiselect feature to select several Loop IO Carriers by pressing
the Select button
to mark the ones that are to be configured,
and then press the Function button
.
The following menu selections will appear:
o Show All Carrier Units (chapter 5.10.4)
o Show Carrier Points (chapter 5.10.5)
o Show Carrier Inputs (chapter 5.10.6)
o Show Carrier Outputs (chapter 5.10.7)
 Scroll with the arrow up/down buttons to select the desired menu,
then follow the instructions in the relevant chapter.


Autronica Autroprime 2 Specifications

General

Brand	Autronica
Model	Autroprime 2
Category	Measuring Instruments
Language	English