6. Select Night service.
7. Press the OK button.
8. Enter the two-digit number of the line for which you want to set up operators.
Press the corresponding line key instead of entering the line number.
9. Select the number for which you want to set up an operator.
10. Press the OK button.
11. Enter the internal number of the telephone which is to be set up as an operator. For
example, 13.
12. If necessary, enter four further internal numbers of telephones which are also to be
set up as operators for this night service.
13. If necessary, select Next line and set up operators for this line.
14. Press the Back softkey.
The system saves the new setting.
15. To change existing answering stations, simply enter the new operators.
Related topics:
Activating Night service on page 78
Assigning call forwarding destinations *
You can assign up to five call forwarding destinations for each exchange line. Call forwarding
takes place after a set time when a operator is called through the exchange line. The time
before the call is forwarded can be set globally for the system between 0 and 300 seconds.
If you set up call forwarding for the operator but do not specify a forwarding destination, the
system forwards the call as a general call.
1. Press the Avaya Home button.
2. Select Settings.
3. Press the OK button.
4. Select System functions.
5. Press the OK button.
6. Select Call forwarding.
7. Press the OK button.
8. Enter the two-digit number of the line for which you want to set up operators.
Assigning call forwarding destinations *
Avaya 9508 Series Digital Deskphone User Guide March 2011 103
To Next Page
Loading...
