Appendix A: Remote features
Changing call diversion remotely *
You can call your telephone system from an external telephone to set up or change a call
diversion for your telephone or for other telephones.
You can do this from any telephone with DTMF suffix dialing. In many cases, you can use only
certain preset telephones for this feature. For more information, contact your system
administrator.
Your system administrator can enable the Changing call diversion remotely feature on your
telephone. To know the remote control access number and PIN and also the codes for
activating and deactivating call diversion, contact your system administrator.
1. Dial the remote control access number from the external telephone.
2. Enter your internal number.
3. Enter your PIN.
4. Enter the Codes for Activate Call diversion.
5. Enter the diversion target number.
6. To deactivate the diversion, enter the appropriate code.
7. To set up or to change the call diversion, enter the code for Activate follow-me
beginning with an asterisk (*).
8. Enter the external line code of the system and the new destination to which you
want to divert the calls. An acknowledgement tone sounds after a short time.
9. To deactivate the call diversion, enter the code for Deactivate follow-me.
Related topics:
Introduction to call diversion on page 31
Avaya 9508 Series Digital Deskphone User Guide March 2011 117
To Next Page
Loading...
