Avaya 9508 Series - Setting up Standard Access

6. Select Conference bridge.
7. Press the OK button.
8. Select PIN: 0000.
9. Press the OK button.
10. Enter the new 4-digit access PIN.
Different conferences can have the same access PIN.
You have changed the access PIN.
Setting up standard access *
You can use the standard PIN to log into the conference bridge when it is not reserved.
1. Press the Avaya Home button.
2. Select Settings.
3. Press the OK button.
4. Select Applications.
5. Press the OK button.
6. Select Conference bridge.
7. Press the OK button.
8. Select Standard PIN.
9. Press the OK button.
You are shown that the standard PIN cannot be used, e.g. PIN: 0000 Not active.
10. Select Activate.
11. Press the OK button.
12. Press the Back softkey.
You can now access the conference room using the standard PIN.
Next steps
To block access to the conference using the standard PIN:
1. Enter the Standard PIN menu.
2. Select Deactivate.
3. Confirm by pressing the OK button.
Conference bridge settings
Avaya 9508 Series Digital Deskphone User Guide March 2011 93