Related Links
Customizing ring tones on page 98
Ring tone XLS cell descriptions on page 100
Ring tone XLS cell descriptions
Cell Name Description Comment
Ringer Name Name of this custom Ring Tone
file, for example, Ringtone 1
This filename will be assigned
a .XML extension upon completing
all required cells and pressing the
"Create xml" cell button.
Ringer Index This numbers the xml file as one
of the 8 patterns used in
personalized ringing. For example,
index 2 will be the second
personalized ringing choice a user
will have on their deskphone.
Eight xml files with indices 1-8
need to be created to customize
all the available personalized
ringing choices that will be
presented on a deskphone. If less
than 8 indices/files are set in the
settings file, Avaya standard
ringing patterns will be used for
the missing indices.
Type of Wave Leave empty; this cell is not
currently used.
Reserved for future use.
Number of Active Frequencies Up to four active frequencies can
be set. Valid values are 1, 2, 3, or
4.
Frequency Values The range of frequency values is
from 0 to 3999Hz.
Number of Notes Number of notes in this ring tone,
from 1 to 3. A note is an interval in
which a frequency is used.
Currently, a custom ring tone has
a 3 note maximum.
Note 1, 2, and 3 This value represents a collection
of frequency intervals that are
grouped together and repeated
over and over again as the ring
tone
Note Pulse State The pulse state has two possible
settings - On or Off
Table continues…
Administering deskphone options
100 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
