Parameter Type Default
value
Description
• 4: aescm128-hmac32-unauth.
• 5: aescm128-hmac80-unenc.
• 6: aescm128-hmac32-unenc.
• 7: aescm128-hmac80-unenc-unauth.
• 8: aescm128-hmac32-unenc-unauth.
• 9: None.
• 10: aescm256-hmac80.
• 11: aescm256-hmac32.
SDPCAPNEG Integer 1 Specifies the SDP capability negotiation. Assign one
of the following values:
• 0: Disables SDP capability negotiation.
• 1: Enables SDP capability negotiation.
ENFORCE_SIPS_URI Integer 1 Specifies the enforcement of SIPS URI with SRTP.
Assign one of the following values:
• 0: Not enforced
• 1: Enforced
100REL_SUPPORT Integer 1 Specifies whether the 100rel option tag is included in
the INVITE header field per RFC 3262. Assign one
of the following values:
• 0: The tag is not included.
• 1: The tag is included.
Trusted certificates and SCEP
Parameter
Type Default
value
Description
TRUSTCERTS String Null Specifies the file names of certificates to be used for
authentication.
MYCERTURL String Null Specifies the URL to access Simple Certificate
Enrollment Protocol (SCEP) server. The device
attempts to contact the server only if this parameter
is set to other than its default value.
MYCERTCN String $SERIA
LNO
Specifies the Common name (CN) for SUBJECT in
SCEP certificate request. The values can either be
$SERIALNO or $MACADDR.
If the value includes the string "$SERIALNO”, that
string will be replaced by the phones serial number.
Table continues…
General parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
