Parameter Type Default
value
Description
If the value includes the string "$MACADDR", that
string will be replaced by the phones MAC address.
MYCERTDN String Null Specifies common part of SUBJECT in SCEP
certificate request. This value defines the part of
SUBJECT in a certificate request including
Organizational Unit, Organization, Location, State,
and Country that is common for requests from
different devices.
MYCERTKEYLEN Integer 1024 Specifies the private key length in bits to be created
in the device for a certificate enrollment. The range is
from 1024 to 2048.
MYCERTRENEW Integer 90 Specifies the percentage used to calculate the
renewal time interval out of the device certificate’s
Validity Object. If the renewal time interval has
elapsed the phone starts to periodically contact the
SCEP server again to renew the certificate. The
range is from 1 to 99.
MYCERTWAIT Integer 1 Specifies the behavior of the device when performing
certificate enrolment. assign one of the following
values:
• 0: Periodical check in the background.
• 1: Wait until a certificate or a denial is received or a
pending notification is received.
MYCERTCAID String CAIdenti
fier
Specifies the Certificate Authority Identifier.
Certificate Authority servers may require a specific
CA Identifier string in order to accept GetCA
requests. If the device works with such a Certificate
Authority, the CA identifier string can be set through
this parameter.
SCEPPASSWORD String $SERIA
LNO
Specifies a challenge password to use with SCEP.
The value of SCEPPASSWORD, if non-null, is
included in a challengePassword attribute in SCEP
certificate signing requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO,. If the value
contains $MACADDR, $MACADDR is replaced by
the value of MACADDR without the colon
separators.
Configuration through the settings file
44 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
