Port Protocol Decription
This option is only required if you are using direct WebRTC
media.
Internal firewall rules
Port Protocol Desciption
3478 UDP For UPD media from Avaya SBCE. For traffic that runs from
the A interface of Avaya SBCE to the MCU 7K servers and
Avaya Aura
®
Media Server.
50000 to 55000 UDP For UPD media from Avaya SBCE. For traffic that runs from
the A interface of Avaya SBCE to the MCU 7K servers and
Avaya Aura
®
Media Server.
12000 to 13200 UDP For UPD media from media servers. For traffic that runs from
MCU 7K servers to the A interface of Avaya SBCE.
16384 to 16984 UDP For UPD media from media servers. For traffic that runs from
MCU 7K servers to the A interface of Avaya SBCE.
6000 to 32588 UDP For UPD media from media servers. For traffic that runs from
Avaya Aura
®
Media Server to the A interface of Avaya SBCE.
Configuring a TURN/STUN profile for WebRTC calls on Avaya Session
Border Controller for Enterprise
Procedure
1. Log in to the Avaya SBCE web administration interface.
2. Navigate to Device Specific Settings > TURN/STUN Service.
3. From the Application pane, select the Avaya SBCE device for which the new TURN/STUN
profile will be created.
4. Click TURN/STUN Profiles.
5. Click Add.
The system displays the Add TURN/STUN Profile window.
6. In Profile Name, provide a name for the TURN/STUN profile.
For example: turnProfileForWebrtcCalls.
7. In UDP Listen Port, enter 3478.
8. In TCP/TLS Listen Port, enter 443.
9. If TLS TURN media is required, then in TLS Server Profile, specify the TLS server profile
for a management interface that you created.
For more information, see the tasks outlined in TLS server profile checklist for client side
TURN configuration on page 125. An example of the TLS server profile name is
turnmediaTlsProfile.
Avaya Session Border Controller for Enterprise configuration
October 2018 Deploying the Avaya Aura
®
Web Gateway 126
Comments on this document? infodev@avaya.com
To Next Page
