10. In Media Relay Port Range, specify a range that does not overlap with the port range
used by Avaya SBCE for other protocols, such as SIP.
The default range is 50000 to 55000.
11. Select the Authentication check box.
12. Select the Client Authentication check box.
13. Select the UDP Relay check box.
14. Click Finish.
Configuring the TURN relay service for WebRTC calls on Avaya Session
Border Controller for Enterprise
Procedure
1. Log in to the Avaya SBCE web administration interface.
2. Navigate to Device Specific Settings > TURN/STUN Service.
3. From the Application pane, select the Avaya SBCE device for which you need to create a
new TURN relay service.
4. Click TURN/STUN Relay.
5. Click Add.
The system displays the Add TURN/STUN IP Pairing window.
6. In Listen IP, provide the listen IP address of the TURN server from the B1 interface.
Important:
Do not use this IP address for any other interface bound to port 443.
7. In Media Relay, provide the media relay IP address of the TURN server from the internal
A1 interface that you used for load monitoring.
8. In Service FQDN, provide the FQDN that resolves to the address specified in the Listen
IP field.
For example, turnmedia.company.com.
9. In TURN/STUN Profile, select the TURN/STUN profile that you created for WebRTC calls.
10. Complete the following fields:
In TURN/STUN Profile, select the TURN/STUN profile that you created for WebRTC
calls.
For example: turnProfileForWebrtcCalls. For more information, see
Configuring a TURN/STUN profile for WebRTC calls on Avaya Session Border
Controller for Enterprise on page 126.
11. Click Finish.
External client access configuration
October 2018 Deploying the Avaya Aura
®
Web Gateway 127
Comments on this document? infodev@avaya.com
To Next Page
