Figure 40: USB A/V Bar Mode Active - UX
Figure 41: USB A/V Bar Mode Active – Web
Incoming call will be automatically rejected (Do not disturb mode) and calendar meeting
notifications are silenced. From the GUI and the Web interface you can only turn-off USB A/V Bar
Mode.
On the computer, you can see the CU360 embedded camera, microphones, and speakers as
USB resources.
• Important
• If there are additional audio in/out resources connected to the CU360 once USB
Bar Mode is activated, they will be used by default in place of the embedded
mics/speakers.In particular, the device will apply this order for available audio
paths BT audio headsets/speakerphones connected to CU360USB audio
headsets/speakerphones connected to CU360Speakers of HDMI monitors
connected to CU360 and embedded mic arrayCU360 Embedded speakers and
embedded mic arrayAudio flow may not behave as expected in event of hot
connection / disconnection of BT or USB devices while the CU360 is in USB Bar
Mode.Additional USB camera could not work properly after USB Bar mode is
ended. Please do not connect additional USB cameras to the CU360 if you plan
to use it in Bar Mode.USB A/V Bar Mode Active – Select as USB
Camera/Microphone/Speaker in Spaces
To Next Page
Loading...
