Table 2: Mapping Avaya 96xx and 16xx IP phones for CLI administration
Module name CLI interface name
1603 4610
1608 4610
1616 4620
9610, FW V2.0 +
4606
3
9620, FW V2.0 +
4610
3
9630, FW V2.0 +
4620
3
9640, FW V2.0 +
4620
3
9650, FW V2.0 +
4620
3
Call processing functionality in SLS mode
In survivable mode, SLS provides only a limited subset of Avaya Aura
®
Communication
Manager call processing functionality:
• Limited call routing through a Survivable ARS Analysis Table (in the PIM application or
through the CLI) and COR calling permissions
• Inbound calls are directed in one of three ways:
- Using the Incoming-Routing screen
- Using the Set Incoming-Destination on the Trunk group screen that enables
mapping to a given station
- Inbound calls are directed to a previously-administered pool of available stations (the
Survivable Trunk Dest? field is y on the Station screen). The search algorithm is
circular so that the incoming calls are fairly distributed.
Important:
SLS permits 911 calls, but the specific location information is not transmitted to
the Public Service Answering Point (PSAP). Only the general trunk-identifying
information is transmitted. Emergency personnel will have a general location
associated with the trunk (for example, a building address), but nothing more
specific (for example, a room or office number). Also, if a 911 call disconnects for
any reason, emergency personnel cannot reliably call the originator back. A small
business office’s address is sufficient from the perspective of emergency
routing.
• Communication Manager Feature Access Codes for ARS, contact closure, and Hold
3
For R4.0, the firmware must be build 26_39 or newer. For R5.0, the firmware must be build 27_27 or newer.
Standard Local Survivability (SLS)
104 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
