Chapter 4: Accessing the Branch Gateway
Accessing the Gateway
You can access the Branch Gateway using the CLI, the PIM, and the Avaya Aura
®
Communication Manager. You can manage login permissions by using and configuring
usernames and passwords, and by configuring the Branch Gateway to use RADIUS
authentication. There are special security features that enable and disable the recovery
password, establish incoming and outgoing Telnet connections, and configure SYN cookies
for preventing SYN attacks.
Related topics:
CLI access on page 27
CLI access
The CLI is a textual command prompt interface that you can use to configure the Branch
Gateway and media modules.
Related topics:
Methods to access the CLI on page 28
Logging into the CLI on page 28
Disconnecting a Telnet session on page 28
CLI contexts on page 28
Using CLI help on page 29
CLI access using the local network on page 30
CLI access using a PC device on page 30
CLI access using modems on page 31
Accessing the CLI using a USB modem on page 31
The USB port settings on page 32
Administering Avaya G430 Branch Gateway October 2013 27
To Next Page
Loading...
