To set the IP address of the USB port (i.e., the USB-modem interface), use the ip
address command. For a list of similar commands, see
Summary of CLI
commands for configuring the USB port for modem use on page 248.
6. Configure the serial connection on the remote computer to match the configuration
of the USB port on the Branch Gateway.
For more information, see
The USB port settings on page 331.
The USB port settings
Port setting Value
Baud -
Data bits 8
Parity none
Stop bits 1
flow control hardware
PIM access
The Provisioning and Installation Manager (PIM) enables you to remotely configure devices,
primarily Branch Gateways on a network-wide basis. PIM provides integrated network system
views that ease centralized configuration tasks, especially provisioning and installing large
numbers of gateways simultaneously.
One of PIM’s primary functions is to provision and configure Standard Local Survivability (SLS)
on the Branch Gateway. See
Standard Local Survivability (SLS) on page 101.
PIM is launched from the Avaya Network Management Console. The Avaya Network
Management Console is the central infrastructure application that discovers and monitors
enabled network devices and runs Avaya Integrated Management applications.
PIM must be installed on the same Windows server as Avaya Network Management Console
with System View and Avaya Secure Access Administration.
For detailed information about installing and launching PIM, see Avaya Integrated
Management Enterprise Network Management Installation and Upgrade.
Accessing the Branch Gateway
32 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
