Chapter 16: Advanced switching
Advanced switching
You can configure advanced switching on the switch ports of the Branch Gateway. The switch
ports consist of the ETH LAN ports located on the front panel.
Related topics:
VLAN configuration on page 327
Port redundancy on page 333
Port mirroring on page 337
Spanning tree on page 338
Port classification on page 343
VLAN configuration
A VLAN is made up of a group of devices on one or more LANs that are configured so the
devices operate as if they form an independent LAN. These devices can, in fact, be located
on several different LAN segments. VLANs can be used to group together departments and
other logical groups, thereby reducing network traffic flow and increasing security within the
VLAN.
Related topics:
VLAN Tagging on page 328
Multi VLAN binding on page 328
Gateway VLAN table on page 329
Ingress VLAN Security on page 330
ICC-VLAN on page 330
Configuring ICC-VLAN on page 330
VLAN configuration examples on page 331
Summary of VLAN commands on page 332
Administering Avaya G430 Branch Gateway October 2013 327
To Next Page
Loading...
