Avaya G430 - Page 159

Collecting system parameters data
Procedure
1. At the SAT, enter list media-gateway to display a list of administered
gateways.
2. Look for supported gateways in the Type field.
3. Once you have determined the media gateway of interest, note its IP-Network-
Region.
4. At the SAT, enter display ip-network-region n, where n is the gateway’s
administered IP-Network-Region.
Read the Codec-set field value from the IP Network Region screen.
5. At the SAT, enter display ip-codec-set n, where n is the Codec-set field value
from the IP Network Region screen.
The report lists the supported codes in the Audio Codec field.
6. At the SAT, enter display system-parameters features to display the
Feature Related System Parameters screen.
7. Scroll to page 10 and read the value of the Date Format on Terminals field.
8. At the SAT, enter display media-gateway n, where n is the administered
number of the Media Gateway of interest, to display the Media Gateway screen.
9. Read the Max Survivable IP Ext field value.
Codecs supported in SLS
There can be up to seven distinct codec-sets in use in the system. However, only one codec
set is active for the network region in which the gateway is located.
SLS only supports two codecs:
• G.711 A-law
• G.711 U-law
General system parameters field descriptions
For information about the fields on the IP codec set screen, see Avaya Aura
®
Communication
Manager Screen Reference.
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 159