• insert3
• insert4
Examples
For example:
• set digit-treatment absorb1 removes the first digit from the incoming
DID trunk
• set digit-treatment blank removes any digit treatment from the trunk
group
8. For analog DID trunk groups or DS1 tie trunk groups, enter set digits digits
to define the inserted digit string, where digits is the number of digits.
Note:
The number of digits must comply with the digit-treat parameter in the set
digit-treatment command. If the digit-treat parameter is insert3, then the
digits parameter for this command must be three digits in length.
9. Enter set name name to identify the user name for the trunk group.
Use the 1 to 27 character name as specified on Communication Manager (add
trunk-group n). Type the name string inside double quotes.
10. For ISDN trunks, enter set codeset-display codeset to identify which Q.931
codesets are allowed to send display information to the user phone: codeset0,
codeset6, or codeset7.
11. For ISDN trunks, enter set codeset-national codeset to identify which Q.931
codesets are allowed to send National Information Elements (IEs, or display
information) to the user phone: codeset6 or codeset7.
12. For ISDN trunks, enter set channel-preference type to define how the
Channel Identification IE field is encoded, where type can be one of the following:
• exclusive. The central office must have the ability to grant a call on this channel
or reject the call attempt
• preferred. The central office might offer the call request on another available
channel
13. For ISDN trunks, enter set digit-handling method to define the order of
reception/transmission to be considered with the flow of inbound/outbound:
• enbloc-enbloc
• enbloc-overlap
• overlap-enbloc
• overlap-overlap
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 179
To Next Page
Loading...
