Avaya G430 - Page 183

Module-port values in SLS trunk-group context for analog trunks
Group Type Media Module Number of Ports/
Channels
Description
loop-start did
ground-start
MM711 8 ports 1-8
loop-start ground-
start
MM714 or MM714B 4 ports 5,6,7,8
did MM714 or MM714B 4 ports 1,2,3,4
did MM716 24 ports 1-24
Trunk port values in SLS trunk-group context for digital trunks
Group Type Media Module Maximum Ports/Channels
bri MM720 16
bri MM721 16
bri MM722 4
t1-isdn MM710 23 (FAS)
24 (NFAS)
e1-isdn MM710 30 (FAS)
31 (NFAS)
t1-inband MM710 24
e1-inband MM710 30
Administering signaling-group parameters
Procedure
1. Enter sig-group sgnum, where sgnum is any number from 1 to 650.
The command line prompt changes to sls-sig-group <sgnum>. If you want to
remove the signaling group from the SLS administration, enter exit to leave the
second-level sig-group context and return to the (super-sls)# context, and then enter
clear sig-group sgnum.
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 183