Avaya G430 - Page 191

Root Level
Commands
First Level Context
Commands
Second Level
Context
Commands
Description
show List all dial-pattern SLS
parameters
ds1 Administer DS1 trunks for
SLS
set bearer-
capability
Set the Information
Transfer Rate field of the
Bearer Capability IE in SLS
set bit-rate Set the maximum
transmission rate for the
DS1 facility in SLS
set channel-
numbering
Select the channel-
numbering method for B-
channels on an E1
interface in SLS
set connect Specify the equipment at
the far-end of the DS1 link
in SLS
set country-
protocol
Specify the ISDN Layer 3
country protocol type in
SLS
set interface Specify the glare-handling
convention for a DS1 link in
SLS
set
interface-
companding
Set the interface to agree
with the companding
method used by the far-end
of the DS1 circuit for SLS
mode
set long-
timer
Increase the duration of the
T303 (call establishment)
timer in SLS
set name Identify the user name for a
DS1 facility in SLS
set protocol-
version
Specify country protocol for
countries whose public
networks allow for multiple
ISDN Layer 3 country
protocols for ISDN Primary
Rate service in SLS
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 191