Downloading announcement files from an FTP server
Procedure
Download an announcement file from an FTP server to the Branch Gateway
announcement directory, using the copy ftp announcement-file command.
Specify the file name of the announcement file on the FTP server, followed by the IP
address of the FTP server, and, optionally, a destination file name, including the full
path.
For example:
Gxxx-001(super)# copy ftp announcement-file announcement_file1.wav
192.168.49.10
Uploading an announcment file to a USB mass storage device
Procedure
Upload an announcement file to a USB mass storage device, using the copy
announcement-file usb command.
Specify the file name of the announcement file in the Branch Gateway announcement
directory, followed by the name of the USB device, and, optionally, a destination file
name, including the full path.
Example
Gxxx-001(super)# copy announcement-file usb local_announcement2.wav
usb-device0 remote_announcement2.wav
Downloading an announcement file from a USB mass storage device
Procedure
Download an announcement file from a USB mass storage device to the Branch
Gateway announcement directory, using the copy usb announcement-file
command.
Specify the name of the USB device, followed by the file name of the announcement
file on the USB device, and, optionally, a destination file name, including the full
path.
Announcement files
Administering Avaya G430 Branch Gateway October 2013 323
To Next Page
Loading...
