Avaya G430 - Page 38

For a full description of the commands and their output fields, see Avaya G430 CLI
Reference.
User accounts CLI commands
All of the following commands manage user accounts. For more information about these
commands, see Avaya G430 CLI Reference.
Command Description
login authentication
inactivity-period
Disable a local user account after an inactivity period
of 2-365 days.
login authentication
lockout
Lockout or disable a local user account after
successive failed login attempts
You can configure the lockout period to between
30-3600 seconds. Both the lockout and the disabling
policies go into effect after a configured 1-10
successive failed login attempts.
login authentication
min-password-digit-
chars
Set the minimum number of digit characters that a
password must contain
login authentication
min-password-length
Set the minimum password length
The minimum password length must be at least as
great as the sum of the minimum number of lowercase
characters, uppercase characters, digit characters,
and special characters.
login authentication
min-password-lower-
chars
Set the minimum number of lowercase characters that
a password must contain
login authentication
min-password-special-
chars
Set the minimum number of special characters that a
password must contain
Special characters are any printable non-
alphanumeric characters except for white characters
(blank or tab), and a double quote ("), which is ascii
character 34. The default is 0 special characters.
login authentication
min-password-upper-
chars
Set the minimum number of uppercase characters that
a password must contain
login authentication
password-expire
Cause all local user passwords to expire after a
specified number of days
password Change the password of a user account
Accessing the Branch Gateway
38 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com