Avaya G430 - Page 402

Root level
command
First level
command
Second level
command
Description
destination
-ip
Define an equation on the
destination IP
dscp Specify the DSCP value to be
set by the current IP rule
fragment Apply the current rule to non-
initial fragments only
icmp Set 'ip-protocol' to ICMP and an
equation on the types of ICMP
messages
ip-protocol Set the IP protocol
source-ip Set the current rule to apply to
packets from the specified
source IP address
tcp
destination
- port
Set 'ip-protocol' to TCP and an
equation on the destination port
tcp source-
port
Set 'ip-protocol' to TCP and an
equation on the source port
udp
destination
- port
Set 'ip-protocol' to UDP and an
equation on the destination port
udp source-
port
Set 'ip-protocol' to UDP and an
equation on the source port
name Name a capture list
owner Set the name of the person or
application that has created the
list
show capture Show the sniffer status
show
capture-
buffer hex
Show a hex-dump of the
captured frames
show ip
capture-list
Show capture list(s)
show upload
status
View capture file upload status
Monitoring applications
402 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com