Procedure
1. Optionally display the current ASG authentication file version, using the show
auth-file info command.
For example:
Gxxx-001(super)# show auth-file info
Authentication File (AF) information:
AF-ID :7000012345
Date/time : 15:02:27 27-SEP-2005
Major release : 4
2. Use Windows File Explorer or another file management program to create a
directory on an FTP, SCP or TFTP server for storing authentication files.
For example, C:\licenses.
3. Access the Internet and go to rfa.avaya.com.
4. Login using your SSO login and password.
The AFS and RFA information home page appears.
5. Start the AFS application from the RFA information page.
Follow the instructions outlined in the Authentication File System (AFS) Guide to
create and download the authentication file.
6. Download the authentication file from an FTP, SCP or TFTP server or USB mass
storage device to the Branch Gateway.
The filename is the name of the authentication file, including the full path and ip is
the IP address of the host. The source-usb-device is the source USB mass
storage device and source-filename is the full name and path of the
authentication file. The gateway prompts you for a username and password after
you enter the command. To install the authentication file, use one of the following
commands:
• copy ftp auth-file filename ip
• copy scp auth-file filename ip
• copy tftp auth-file filename ip
• copy usb auth-file source-usb-device source-filename
7. After the authentication file is downloaded, you can view the download status using
show download auth-file status.
Examples of configuring ASG authentication
You can perform the following ASG configurations:
• Block Avaya Services login access, using no login authentication services-
logins. This deactivates all Avaya Services logins, including local craft password-based
Security overview
Administering Avaya G430 Branch Gateway October 2013 41
To Next Page
Loading...
