Avaya G430 - Page 467

Root level command Command Description
no ip rip
authentication
mode
Restore the default value, none
ip rip default-
route-mode
Enable learning of the default route
received by the RIP protocol. The
default state is talk-listen.
The default state is talk-listen.
no ip rip
default-route-
mode
Disable listening to default routes.
ip rip poison-
reverse
Enable or disable split-horizon with
poison-reverse on an interface
no ip rip
poison-reverse
Disable the poison-reverse
mechanism
ip rip rip-
version
Specify the RIP version running on
the interface
ip rip send-
receive-mode
Set the RIP send and receive
modes on an interface
no ip rip send-
receive-mode
Set the RIP to talk, that is, to send
reports
ip rip split-
horizon
Enable or disable the split-horizon
mechanism
no ip rip split-
horizon
Disable the split-horizon
mechanism. By default split-
horizon is enabled.
router rip Enable the RIP and enter the router
configuration context or disable the
RIP
no router rip Restore the default value by
disabling RIP
default-metric Set or reset the interface RIP route
metric value
no default-
metric
restore the interface RIP route
metric default value.
distribution-
list
Apply a distribution access list for
incoming or outgoing routing
information in route updates or
deactivate the list
The router
Administering Avaya G430 Branch Gateway October 2013 467