Avaya G430 - Page 550

Parameter Possible values Actual value
• udp
• tcp
• dscp
• fragment
• icmp
• IP protocol
6. The remote peer (crypto isakmp peer) parameters
a. Remote peer
• IP address
• FQDN (dns name)
b. Pre-shared key
• 1 to 127 alphanumerical
characters. 1 to 64 bytes in
hexadecimal notation
7. If the branch IP is dynamic
• If the branch IP is an initiator, set
initiate mode to none (device is
a responder)
• If the branch IP is a responder,
set initiate mode to aggressive
(device is an initiator)
• Set self identity to identify the
device in the remote peer
Summary of VPN commands
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
First level
command
Second level
command
Description
clear crypto
isakmp
Flush a specific ISAKMP SA or
all the ISAKMP SAs
clear crypto
sa
Clear all or specific IPSec SAs
clear crypto
sa counters
Clear the crypto SA counters
IPSec VPN
550 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com