Avaya G430 - Page 585

Root level
command
Command Command Description
name Assign a name to the current
DSCP table entry
show dscp-
table
Display the parameters of the
current DSCP table entry
ip-rule Enter configuration mode for a
specified policy rule or, if the
rule does not exist, create it
and enter its configuration
mode
composite-
operation
Assign the specified
composite operation to the
current rule
destinatio
n-ip
Apply the current rule to
packets with the specified
destination IP address
dscp Apply the current rule to
packets with the specified
DSCP value
fragment Apply the current rule for non-
initial fragments only
icmp Apply the current rule to a
specific type of ICMP packet
ip-protocol Apply the current rule to
packets with the specified IP
protocol
show
composite-
operation
Display the parameters of the
composite operation assigned
to the current rule
show dscp-
table
Display the current list’s DSCP
table
show ip-
rule
Display the attributes of the
current rule
source-ip Apply the current rule to
packets from the specified
source IP address
tcp
destinatio
n-port
Apply the current rule to TCP
packets with the specified
destination port
Policy lists
Administering Avaya G430 Branch Gateway October 2013 585