Note:
For some Bluetooth headsets, volume can be adjusted during the first call after
rebooting the phone. Toggle the slider of the pop-up panel to the right to increase the
volume, and to the left to decrease it.
Pairing a Bluetooth enabled headset with your phone
About this task
You can pair a maximum of ten Bluetooth enabled headsets with the phone, but you can use only
one headset at a time. The phone displays the list of available devices and paired devices.
Before you begin
• Ensure the wireless module is installed in your phone.
• Ensure that the feature is activated by the administrator. Contact your administrator for
details.
• Ensure your Bluetooth headset is in pairing mode.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll down to Bluetooth, and press Select.
4. Scroll to Devices, and press Select.
The phone scans and displays the list of Bluetooth enabled devices.
5. To pair a device, scroll to the headset, and press Pair.
6. To disconnect a paired headset, under Paired devices, press Disconct.
7. To unpair a paired headset, under Paired devices, press Forget.
Turning button clicks on and off
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Use the Down Arrow key to go to the Button Clicks screen.
5. Press Toggle to turn the audio on or off.
6. Press Save.
Customization
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 102
Comments on this document? infodev@avaya.com
To Next Page
Loading...
