Bandwidth H.264 High Profile
Sharpness
H.264 High Profile
Motion
H.264 Baseline
Sharpness
H.264 Baseline
Motion
1.3Mbps
1080p30
1.4Mbps
720p60
1.5Mbps 720p60
1.7Mbps
1080p30
1.9Mbps
1080p60 1080p60
2.5Mbps 1080p60 1080p60
When using the built-in MCU to host videoconferences, the total maximum bandwidth of 12Mbps is
shared amongst the participants. Normally each person is allocated 2Mbps, but when a meeting has
eight participants, each is allocated 1.7Mbps.
You can also determine whether to use more or less bandwidth for participant video versus shared
content like a presentation, and you can even define the bandwidth limits for each network port on
your XT Series.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 112.
Procedure
1. Access the call settings. From the XT Series web interface, select Administrator Settings >
Calls > Preferences > General. From the endpoint's main menu, select Configure >
Advanced > Calls > Preferences > General.
Advanced Configuration of the XT Series
128 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
