Before you begin
1. Verify your computer is running either Windows XP/Vista/7/8, or if it is a Mac, verify it is
running OSX 10.x, up to 10.9.
2. Connect your computer to the Scopia
®
XT Executive (see
Connecting a Computer to the XT
Series on page 65).
3. Perform the Quick Setup wizard, which ends with the Scopia
®
XT Control installation, or
install it at any time from the web interface.
Procedure
1. The Quick Setup wizard provides the web address to access your endpoint from the web,
and displays a user code to pair a computer's keyboard and mouse to the endpoint. You
enter this code at the end of the installation, so make a note of it now.
Figure 59: Installing Scopia
®
XT Control from the Quick Setup
2. Select Minimize to remove the window and expose your computer content.
3. Access the XT Series web interface, as described in Accessing XT Series Web Interface on
page 75.
4. In the main web page of the endpoint, in the Home > XT Control section, select Create
package (
Figure 60: Installing Scopia
®
XT Control for Windows on page 92).
Figure 60: Installing Scopia
®
XT Control for Windows
5.
For Mac users only, copy the setup package to a folder on your computer, and launch the
Scopia
®
XT Control:
You may need to follow the steps in Resolving download problems on page 198.
Initial Configuration of the XT Series
92 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
