Classification: Avery Dennison – Public Setting Supply Options 2-11
Example: Error action is set to overstrike/continue 3x:
If the printer errors on the first label, an overstrike pattern is printed, but the printer
attempts to reprint the image up to three times. If the third consecutive label also
generates an error, an overstrike pattern is printed; however, the printer stops and the
error message is displayed. The operator must resolve the error condition before printing
continues.
In the above example, if the third label did NOT generate an
error,
♦ the batch image is printed
♦ the consecutive error counter is reset
♦ the printer continues processing the batch.
Using Rotate Image
Enabling this option rotates the printed image 180°. This is useful when the orientation of
the supply does not match the format.
We recommend designing your formats as needed, so image rotation is not required.
Make sure the loaded supply matches the image length and width or the rotated image
does not print correctly.
Select To
No Print the image without rotation.
Yes Rotate the image 180° before printing.
Sample RFID Overstrike Label
Sample Bar code Verifier Overstrike Label
To Next Page
Loading...
