6-4 System Administrator’s Guide Classification: Avery Dennison - Public
Setting the Number of Decimal Places
Set the printer for 0, 1, 2, or 3 places after the decimal in a price field. In dollar currency,
you might print prices like this: $24.00 (2 decimal places) or like this: $24 (0 decimal
places).
The decimal places are used in conjunction with Option 42. Refer to the Packet
Reference Manual for more information. The setting decimal places apply when a format
is downloaded. Changing the setting does not affect batches already in the printer.
Select To
0 Do not use decimal places.
prices print as whole numbers: $20
1 Print one place after the decimal.
prices print like this: $20.5
2 Print two places after the decimal.
prices print like this: $20.50
3 Print three places after the decimal.
prices print like this: $20.500
Setting the Slashed Zero Appearance
The slashed zero feature lets you select how you want the zero character printed; either
without a slash, 0 or, with a slash, Ø.
Standard or reduced fonts print the slashed zero character (Ø). Bold and OCR fonts print
the standard zero (0) only. The slashed zero selection does not take effect until the
format is sent to the printer again. If you change the way zero prints, you must resend
your formats.
The setting for slashed zero applies when a format is downloaded. Changing the setting
does not affect batches already in the printer.
Select To
No Do not print zeroes with a slash.
Yes Prints zeroes with a slash (Ø).
To Next Page
Loading...
