Classification: Avery Dennison – Public Using Diagnostics 10-1
USING DIAGNOSTICS
This chapter explains how to check supply quality and enable a password.
For a complete list of printer error message, refer to the Packet Reference Manual on our
Web site.
Option Choices Default
Version Firmware/Serial Number/Board ID/Wireless/RFID 1/
RFID 2/ Easy Setup
NA
Supply Quality NA NA
Password No/Yes No
Factory Set Password
A password is required to access the diagnostic functions.
Press Feed three times and then press Enter.
The Service Diagnostics menu can only be accessed by a Service Representative; it
requires a separate password.
To Next Page
Loading...
