10-2 System Administrator’s Guide Classification: Avery Dennison - Public
Checking the Versions
View the version number of the printer’s firmware, RFID module’s firmware, and RFID
inlay database. The printer’s serial number is also viewable.
Select To
Firmware View the printer’s firmware version.
Serial Number View the printer’s serial number.
Board ID View the control board’s revision level.
Wireless View the Wireless module type.
RFID 1 View the RFID module’s version. This is the optional encoder.
RFID 2 View the RFID module’s version. This is the optional external
reader.
Easy Setup View the database version number for the RFID inlay database,
d46ESXX.db. Check our web site for updates. See “
Updating the
RFID Inlay Database” for more information
Checking Supply Quality
The printer continuously stores data from 16 of the most recently printed supplies to
check the reflectivity of the sense marks on the supply. Before you check your supply
quality, print a batch of supplies or test labels.
Select To
Supply Quality View the supply quality.
The message "No data!" appears if you have not printed any labels.
Press or to display the readings.
Len The length of the loaded supply in dots.
Max Should always be greater than Min listing.
OK Did the sense mark pass the detection test? Y or N
To Next Page
Loading...
