6-6 System Administrator’s Guide Classification: Avery Dennison - Public
Setting the Image Error Mode
Image errors occur when there is a problem producing a complete label. Press ESCAPE
to clear an image error.
Select To
Disable If a format does not print as expected, an error message appears on
the display.
Enable
If a format does not print as expected, no error message appears
and the format prints as is.
For example, bar codes require a non-print zone; if a bar code is
placed too close to the edge of the label, no error is reported and
the bar code may not scan properly.
Image errors include:
600 unable to image batch 614 portion of field off label
601 problem during imaging 615 invalid PDF417 bar code data
603 missing batch 618 invalid font size
611 invalid font, bar code or density 620 missing font data
612 missing batch data 621 invalid downloaded font
613 reference point off label 622 not enough font memory
Error 616 (bar code dot shifting failed) is always reported.
Setting the Configuration Packet Mode (Ignore Config)
The printer can respond to or ignore all online configuration packets.
We recommend changing your host’s data stream, but if that is not possible, enable this
option. Use caution if ignoring online configuration packets, because the printer may
need the configuration for proper operation!
Select To
Disable The printer responds to all online configuration packets.
Enable The printer ignores all online configuration packets. This is useful
when you cannot change your host’s data or when you want the
printer to operate as specified through the printer’s menu.
To Next Page
Loading...
