Classification: Avery Dennison – Public Setting Communications 3-3
Resetting to Default Values
Use this setting to reset the printer’s communication values to the defaults listed at the
beginning of this chapter.
Select To
No Do not reset the serial communication values to their defaults.
Yes Reset the serial communication values to their defaults.
Using USB Communications
Set the mode for the USB port. The printer reboots whenever the USB mode is changed.
The USB settings are in the table below.
Option Choices Default
Mode Printer/Virtual Serial Printer
Setting the Mode
Select To
Printer Using the Printer port, Microsoft® Windows® prompts the user for the
printer driver, which is provided by our third-party developers and
found on our Web site:
https://printers.averydennison.com/en/home/resources/service-and-
support/utilities-and-firmware/ADTP1-printer.html
Download the latest drivers and follow the on-screen prompts as
necessary.
Virtual Serial
Using the Virtual Serial port requires the ADTPx.inf file, which
installs the printer as a virtual com port (for example COM4, COM5,
etc.) and can be found on our Web site:
https://printers.averydennison.com/en/home/resources/service-and-
support/utilities-and-firmware/ADTP1-printer.html
Download the latest drivers and follow the on-screen prompts as
necessary.
The updated driver appears in the Ports list. When
connected via USB, the printer’s display includes the USB
status icon:
To Next Page
Loading...
